Matek RC Drone Flight Controller H743-WING V2 FC Built in OSD BEC Current Sensor Betaflight or Inav Configurator for RC FPV Airplane Fixed Wing Drones

$116.62

Added to wishlistRemoved from wishlist 0
Category: Tag:


Price: $116.62
(as of May 11,2022 12:09:22 UTC – Details)



Parameters:
MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
Baro: Infineon DPS310 (I2C2)
OSD: AT7456E (SPI2)
Blackbox: MicroSD card slot (SDIO)
7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
13x PWM outputs(including “LED” pad)
2x I2C
1x CAN
6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)

3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
1x SPI3 breakout
USB/Beep Extender with Type-C(USB2.0)
Dual Camera Inputs switch
5V/9V(12V) for Camera/VTX power switch
High-precision Current Sense (90A continuous, 220A peak)
Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in
ArduPilot
ADC VB2 voltage divider: 1K:20K
ADC AirSpeed voltage divider: 20K:20K
Static power 160mA@5V

Use ICM42605 instead of ICM20602
Moved PDB/current sensor from FC board to bottom plate.
Moved 8A BEC from top board to bottom plate.
JST-GH connector for CAN port instead of JST-SH connector.
Add a JST-GH connector for I2C2, for plug and play with ASPD-4525

Package:
1x H743-WING Flight Controller
1x USB(Type-C)/Beep (Passive buzzer) Extender
1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
1x Rubycon ZLH 35V 470uF capacitor
Dupont 2.54 pins (Board is shipped unsoldered)

FC Firmware:ArduPilot(ChiBiOS): MATEKH743 ; INAV: MATEKH743
PDB:Input voltage range: 8~36V (3~8S LiPo) w/TVS protection 2x ESC power pads Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot) Sense resistor: 90A continuous, 220A peak.
BEC 5V/9V /12V output;Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed;Continuous current 2 Amps, 3A Peak
BEC Vx output:Designed for Servos Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current 8 Amps, 10A Peak BEC 3.3V output
Physical : Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 54 x 36 x 13 mm Weight: 30g with USB extender

Matek RC Drone Flight Controller H743-WING V2 FC Built in OSD BEC Current Sensor Betaflight or Inav Configurator for RC FPV Airplane Fixed Wing Drones

$116.62

Pimsleur Language LearningPimsleur Language Learning
Kiwi Travel Booking
Paid Online Writing Jobs
HolidayNomad.com
Logo
Enable registration in settings - general
Shopping cart